Capacitive Sensor Pipe Liquid Level Detection CE10SN13DPO
Capacitive Sensor Pipe Liquid Level Detection CE10SN13DPO
This capacitive proximity sensor is used for non-contact detection of metallic and non-metallic objects such as liquid, powder and granular materials; it can also detect materials through glass or plastic walls.
Note that the standard detecting distance is based on a standard shape approaching the sensor in a standard way. The real detecting distance will vary depending on the shape, thickness and type of material being detected.
Output type: PNP NO
Product Specifications
| Sensor Properties | |
|---|---|
| Controlled By | Digital Input (5V) |
| Sensor Type | Proximity (Capacitive) |
| Sensor Output Switch Type | Normally Open |
| Detection Hysteresis Min | 3 % |
| Detection Hysteresis Max | 20 % |
| Sensor Response Time Max | 20 ms |
| Electrical Properties | |
| Supply Voltage Min | 10 V DC |
| Supply Voltage Max | 30 V DC |
| Current Consumption Max | 15 mA |
| Protection Circuitry | Reverse Polarity, Surge, Overload and Short-Circuit |
| Physical Properties | |
| Cable Length | 2 m |
| Material | PBT |
| Operating Indicator | Yellow LED |
| IP Rating | IP67 |
| Operating Temperature Min | -25 °C |
| Operating Temperature Max | 70 °C |
| Operating Humidity Min | 35 %RH |
| Operating Humidity Max | 95 %RH |
- Widely object detect range: metal, plastic, and fluid etc.
- Be able to detect different objects in the container through non-metal container wall.
- Sensibility could be adjusted by a potentiometer on the sensor.
Documents
This sensor requires a 12V power supply and outputs a 0-5V signal depending on whether the sensor is triggered. For a simple way to provide 12 volts, you can use our 12V sensor adapter. It uses the 5V supply from your InterfaceKit or Hub and steps it up to 12V while simultaneously passing the 0-5V signal from the sensor into the Phidget cable.
