Cytron DC Geared Motor (6V) SPG30A-10K
Cytron DC Geared Motor (6V) SPG30A-10K
SPG30 is 1.1W DC brushed motor with compact size, a low-cost solution for projects such as medium-size robot, omni drive robot, mechanism, etc. This model of SPG30 brushed motor comes with gear ratio of 10:1 and can operate up to 6 volts. Each motor is 6mm diameter D-shaft.
Note: Lower voltage might not have enough torque to drive the wheel or mechanism; higher voltage will provide higher torque and higher speed, but it will shorten the life of the motor.
Mounting
For mounting, the depth of the thread of the motor is 3.2 mm. So, you need to use 3.2 mm length of M3 size screw (not included with the thickness of the bracket). Longer screw will damage the gearbox. You may need to consider the thickness of the bracket or other mechanism that you need to attach to the motor for choosing the right length of screw.
Specifications:
- Rated voltage: 6VDC
- No load current (mA) : < 80
- No load speed (r.p.m) : 225 ± 23
- Rated load torque (kgf.cm) : 0.35
- Rated current (mA) : < 340
- Rated load speed (r.p.m) : 169 ± 17
- Gear ratio: 10:1
- Shaft: 6 mm diameter x 15.5 mm length
- Sample Application: lightweight mechanism such as: bank note machine, handling machine, educational robot, etc
You may need:
-
2A motor driver shield - For Arduino user
-
Plastic Wheel - for mobile robot
-
Coupling - for mounting customized wheel or mechanism
-
Bracket - for mounting motor
Documents:
Tutorials:
Video:
