Menu
Cart 0

Original Arduino MKR ZERO

  • $43.00AUD
  • Save $12
  • (Exc. GST)


  • Available in stock

  • Shopify secure badge
  • $ We Ship Worldwide from AU (Perth), and Prices (AUD) are Exc. GST
  • $ We Offer Further Discounts for Resellers & Large Orders
  • $ We Accept Purchase Orders & Net30 Payment for Educational Institutes
  • Original  Arduino MKR ZERO

    MKR ZERO has an on-board SD connector with dedicated SPI interfaces (SPI1) that allows you to play with MUSIC files with no extra hardware!

    Watch out music makers, we’ve got some news for you! We have released two libraries for your enjoyment:

    • Arduino Sound library – a simple way to play and analyze audio data using Arduino on SAM D21-based boards.
    • I2S library – to use the I2S protocol on SAMD21-based boards. For those who don’t know, I2S (Inter-IC Sound) is an electrical serial bus interface standard for connecting digital audio devices.

    The MKR ZERO brings you the power of a Zero in the smaller format established by the MKR form factor. The MKR ZERO board acts as a great educational tool for learning about 32-bit application development. It has an on-board SD connector with dedicated SPI interfaces (SPI1) that allows you to play with MUSIC files with no extra hardware!  The board is powered by Atmel’s SAMD21 MCU, which features a 32-bit ARM Cortex® M0+ core.

    Warning: Unlike most Arduino & Genuino boards, the MKRZero runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board.

    The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it by a LiPo battery. The battery voltage can also be monitored since a connection between the battery and the analogue converter of the board exists.

    You can find here your board warranty information. 

    Getting Started

    In the Getting Started section, you can find all the information you need to configure your board, use the Arduino Software (IDE), and start to tinker with coding and electronics. 

    Need Help?

    Watch out music makers, we’ve got some news for you! We have released two libraries for your enjoyment:

    • Arduino Sound library – a simple way to play and analyze audio data using Arduino on SAM D21-based boards.
    • I2S library – to use the I2S protocol on SAMD21-based boards. For those who don’t know, I2S (Inter-IC Sound) is an electrical serial bus interface standard for connecting digital audio devices.

    Specifications

    Microcontroller SAMD21 Cortex-M0+ 32bit low power ARM MCU
    Board Power Supply (USB/VIN) 5V
    Supported Battery(*) Li-Po single cell, 3.7V, 700mAh minimum
    DC Current for 3.3V Pin 600mA
    DC Current for 5V Pin 600mA
    Circuit Operating Voltage 3.3V
    Digital I/O Pins 22
    PWM Pins 12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 - or 18 -, A4 -or 19)
    UART 1
    SPI 1
    I2C 1
    Analog Input Pins 7 (ADC 8/10/12 bit)
    Analog Output Pins 1 (DAC 10 bit)
    External Interrupts 8 (0, 1, 4, 5, 6, 7, 8, A1 -or 16-, A2 - or 17)
    DC Current per I/O Pin 7 mA
    Flash Memory 256 KB
    Flash Memory for Bootloader 8 KB
    SRAM 32 KB
    EEPROM no
    Clock Speed 32.768 kHz (RTC), 48 MHz
    LED_BUILTIN 32
    Full-Speed USB Device and embedded Host

    We Also Recommend

    Sale

    Unavailable

    Sold Out