Menu
Cart 0

Industrial Cellular 3G/4G WiFi IOT Gateway - TG451 (AU Freq.)

  • $349.00AUD
  • Save $60
  • (Exc. GST)


  • Available in stock

  • Shopify secure badge
  • $ We Ship Worldwide from AU (Perth), and Prices (AUD) are Exc. GST
  • $ We Offer Further Discounts for Resellers & Large Orders
  • $ We Accept Purchase Orders & Net30 Payment for Educational Institutes
  • Industrial Cellular 3G/4G WiFi IOT Gateway - TG451 (AU Freq.)

    TG451 has rich interfaces, such as 4x LAN ports, 1x WAN port, 1x USB port, 2x Relay(Option), 1x RS232(Or RS485), 1x RS485, 2x DI(Digital Input), 1x CAN(Option), Dual SIM(Single module, option) and Dual SIM(Dual Module, option), GPS(Option) and WIFI, etc.

    List of Australia 4G LTE Frequencieshttps://en.wikipedia.org/wiki/4G_connectivity_in_Australia

    Key Features

    1. OPEN WRT, support second development
    2. Rich interfaces, 4x LAN ports, 1x WAN port, 1x USB port, 2x Relay(Option), 1x RS232, 1x RS485, 2x DI, 1x CAN(Option), GPS(Option)
    3. High power and speed WIFI
    4. Din-rail mounting
    5. Dual SIM on dual module(option) or single module(option), SIM 1 as main connection, SIM 2 as back up, and load balance(option, only available on dual module mode)
    6. Support 2-channel Digital Input and DI alarm
    7. 4G/3G/PPPoE/DHCP and Static address connection mode, auto switchover between wired and wireless connectivity
    8. APN/VPDN to ensure the security of data transmission.
    9. Multiple VPN protocols, IPSec, L2TP, PPTP and OPEN VPN.
    10. DHCP server, DHCP binding MAC address, DDNS, Firewall, NAT, DMZ host, QoS, Traffic Analysis, Real-time display of data transfer rate, etc.
    11. TCP/IP, UDP, FTP, HTTP network protocols.
    12. SPI Firewall, DoS attack, VPN traversal, Access Control, Port Mapping, DMZ Mapping, Access Control List(ACL), IP-MAC binding and Clone function, etc.
    13. Support heartbeat link detection, offline automatic reconnection.
    14. Hardware and software auto inspection technology, enable operation fault auto repairing.
    15. Status query of the system, network connection, routing.
    16. Telnet, web, ssh configurations.
    17. Web upgrade, local system log, remote log, serial port output log.

    Specifications

    System
    CPU: Industrial 32-bit
    FLASH: 16MB (Extendable to 64MB)
    SDRAM: 128MB (Extendable to 256MB)

    Cellular Interface
    4G/3G for option (FDD-LTE, TDD-LTE, HSPA/WCDMA, EVDO, TD-SCDMA, EDGE, CDMA 1X and GPRS)
    Cellular Antenna Interface
    Number of Ports: 2
    Note: Standard SMA female antenna interface, characteristic impedance 50Ω
    SIM Interface
    Number of Ports: 1, or 2(Dual SIM is optional)
    Note: Standard drawer type card holder, support 1.8V/3V SIM/UIM card, built-in 15KV ESD protection

    Ethernet Port (RJ45)
    Number of Ports: 5, 1x WAN, 4x LAN
    Note: 10/100M, Auto MDI/MDIX, 1.5KV magnetic isolation protection

    USB Port
    Number of ports: 1x USB 2.0
    Note: used for data storage (up to 128G) or gateway upgrade.

    Relay(Option)
    Number of ports: 2, up to 5A output
    Note: to control the power supply of external devices.

    DI(Digital Input)
    Number of ports: 2
    Input range: DC 0-30V
    Note: to check the status of external devices.

    CAN(Option)
    Number of ports: 1x standard CAN interface

    WIFI
    Standard: IEEE802.11b/g/n for wireless LAN
    Transmission Rates: 
    IEEE802.11b/g: Up to 54Mbps, IEEE802.11n: Up to 300Mbps
    Security: WEP, WPA/WPA2
    TX Transmit Power: 21.5dBm (11g), 26dBm (11b)
    RX Sensitivity: <-72dBm@54Mpbs

    GPS (Option)
    Built in external GPS module
    Serial Interface (6-pin Industrial terminal block)
    Number of interfaces: 2, 1x RS232, 1x RS485
    Note: Built-in 8KV ESD protection for RS232, and 15KV ESD protection for RS485

    Serial Communication Parameters
    Baudrate: 300~230400bits/s
    Data Bit: 5, 6, 7, 8 bits
    Stop Bit: 1, 1.5, 2 bits
    Check: No, Even-parity, Odd Parity, SPACE and MARK

    Power Requirements
    Standard Power: DC 12V/1.5A
    Power Range: DC 5~35V
    Note: Built-in power inverting protection and over voltage protection
    Power Consumption
    Communication: 121~280mA@12VDC
    Standby: 115~210mA@12VDC
    Scheduled Shutdown: 2mA@12VDC

    LED Indicators
    Power, System, WIFI, Alarm, Online, Signal Strength

    Reliability
    MTBF: >10,000hrs
    EMC up to level 3
    Use NTP technology, built-in RTC
    SIM/UIM card port built-in 15KV ESD protection

    Warranty
    Warranty Period: 12 months

    Environmental Limits
    Operating Temperature: -35~+75ºC (-31~+167 ºF)
    Storage Temperature: -40~+80ºC (-40~+176 ºF)
    Ambient Relative Humidity: 93%±3%, non-condensing

    Physical Characteristics
    Protection Class: Housing and system are isolated safely, ideal for industrial automation application
    Weight: 790g (1.74lbs)
    Dimension: 145x143x45mm (5.71x5.63x1.77 inches)

    Upgrading the device with new Firmware in THIS LINK

    Documents


      We Also Recommend

      Sale

      Unavailable

      Sold Out