Industrial IOT, AI, Sensing, Telecommunication & Customised Remote Monitoring. Plus Enjoy Our Offers!

Menu
Cart 0

WiFi 7 Click - MikroElektronika Low Power IEEE 802.11 b/g/n Module

  • $29.00
  • Save $20
  • (Exc. GST)


  • Available in stock

  • $ We Ship from our stock in AU (Perth) with pickup option, and Prices are Exc. GST
  • $ We Offer Quantity Discounts for Large Orders 10+ qty (Request for Quote)
  • $ We Accept Purchase Orders & Net 30 Payment for Eligible Accounts
  • WiFi 7 Click - MikroElektronika Low Power IEEE 802.11 b/g/n Module

    WiFi 7 click carries the ATWINC1510-MR210PB IEEE 802.11 b/g/n module, specifically optimized for low-power IoT applications. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI interface, with additional functionality provided by the following pins on the mikroBUS™ line: PWM, INT, RST.

    ATWINC1510-MR210PB features

    The ATWINC1510-MR210PB is a low-power consumption 802.11 b/g/n module which is specifically optimized for low-power IoT applications.

    The module has a Cortus APS3 32-bit processor. This processor performs many of the MAC functions, including but not limited to association, authentication, power management, security key management, and MSDU aggregation/de-aggregation. In addition, the processor provides flexibility for various modes of operation, such as STA and AP modes.

    Module current consumption

    The table below describes the current consumption of the ATWINC1510-MR210PB module:

    Device state Code rate Output power, dBm Current consumption(1)
    IVBATT IVDDIO
    ON_Transmit 802.11b 11Mbps 20.5 290mA 22mA
    802.11b 11Mbps 19.5 294mA 22mA
    802.11g 6Mbps 19.5 292mA 22mA
    802.11b 54Mbps 17.5 250mA 22mA
    802.11n MCS 0 18.0 244mA 22mA
    802.11n MCS 7 15.5 289mA 22mA
    ON_Receive 802.11b 1Mbps N/A 52.5mA 22mA
    802.11b 11Mbps N/A 52.5mA 22mA
    802.11g 6Mbps N/A 55.0mA 22mA
    802.11b 54Mbps N/A 57.5mA 22mA
    802.11n MCS 0 N/A 54.0mA 22mA
    802.11n MCS 7 N/A 58.5mA 22mA
    ON_Doze N/A N/A 380µA <3.5µA
    Power_Down N/A N/A <0.5µA <3.5µA

    Additional pins

    Additional pins on the WiFi 7 click, besides the ones on the mikroBUS™ line:

    Specifications

    Type Wi-Fi
    Applications Optimized for low power IoT applications
    On-board modules ATWINC1510-MR210PB
    Key Features IEEE® 802.11 b/g/n 20MHz solution, integrated PCB antenna, supports IEEE 802.11 WEP, WPA, WPA2 Security
    Interface SPI,GPIO
    Input Voltage 3.3V
    Compatibility mikroBUS
    Click board size M (42.9 x 25.4 mm)

    Pinout diagram

    This table shows how the pinout on WiFi 7 click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).

    Notes Pin Mikrobus logo.png Pin Notes
    NC 1 AN PWM 16 EN Module Enable
    Active-Low Hard Reset RST 2 RST INT 15 INT Device Interrupt output
    Chip select CS 3 CS TX 14 NC
    SPI Clock SCK 4 SCK RX 13 NC
    SPI Master Input Slave Output MISO 5 MISO SCL 12 NC
    SPI Master Output Slave Input MOSI 6 MOSI SDA 11 NC
    Power supply +3.3V 7 3.3V 5V 10 NC
    Ground GND 8 GND GND 9 GND Ground

    Programming

    Code examples for WiFi 7 click, written for MikroElektronika hardware and compilers are available on Libstock.

    Downloads


      We Also Recommend

      Sale

      Unavailable

      Sold Out