MEGA DEALS! NOW ON (LIMITED TIME!)

Menu
Cart 0

Stepper 4 click - MikroElektronika Bipolar Stepping Motor Driver

  • $25.00AUD
  • Save $10AUD
  • (Exc. GST)


  • Available in stock

  • Shopify secure badge
  • $ We Ship Worldwide from AU (Perth), and Prices (AUD) are Exc. GST
  • $ We Offer Further Discounts for Resellers & Large Orders
  • $ We Accept Purchase Orders & Net30 Payment for Educational Institutes
  • Stepper 4 click - MikroElektronika Bipolar Stepping Motor Driver

    Stepper 4 click can be used for driving a stepper motor and controlling its step resolution, rotation direction, and time between the steps. It has output drive capability of 2A.

    Stepper 4 click carries the TB67S269FTG, a two-phase bipolar stepping motor driver from Toshiba. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over the following pins on the mikroBUS™ line: AN, RST, CS, PWM, INT.

    How the click works

    There is a connector with two screw terminals used for connecting external DC supply.

    The other four connectors are used for connecting the stepper motor to the click. After a motor is connected, it can be controlled by the MCU through the Stepper 4 click.

    The onboard potentiometer is used to set the motor's torque.

    TB67S269FTG features

    The TB67S269 is a two-phase bipolar stepping motor driver from Toshiba.

    Step mode selector

    There are several different resolutions a stepper motor can use - a full step, half a step, etc. The driver on this click also allows different resolutions, from a full step to 1/32 of a step.

    DMODE0 DMODE1 DDMODE2 Function
    0 0 0 Standby mode (the OSCM is disabled and the output stage is set to ‘OFF’ status)
    0 0 1 Full step resolution
    0 1 0 Half step resolution (Type(B))
    0 1 1 Quarter step resolution
    1 0 0 Half step resolution (Type (B))
    1 0 1 1/8 step resolution
    1 1 0 1/16 step resolution
    1 1 1 1/32 step resolution

    Specifications

    Type Stepper
    Applications The click is designed for driving bipolar step motors in full, 1/2, 1/4, 1/8, 1/16, 1/32 step modes
    On-board modules TB67S269FT CLOCK-in controlled bipolar stepping motor driver, three pairs of screw terminals, potentiometer
    Interface GPIO
    Input Voltage 3.3V or 5V
    Click board size L (57.15 x 25.4 mm)

     

    Downloads


    We Also Recommend

    Sale

    Unavailable

    Sold Out