MEGA DEALS! NOW ON (LIMITED TIME!)

Menu
Cart 0

Micro Load Cell (0-100g) - CZL639HD

  • $12.00AUD
  • Save $7AUD
  • (Exc. GST)


  • Available in stock

  • Shopify secure badge
  • $ We Ship Worldwide from AU (Perth), and Prices (AUD) are Exc. GST
  • $ We Offer Further Discounts for Higher Quantities & Large Orders (Request for Quote)
  • $ We Accept Purchase Orders & Net30 Payment for Educational Institutes
  • Micro Load Cell (0-100g) - CZL639HD

    This load cell measures shear force up to 100g and connects to a bridge input.

    A load cell is a force sensing module - a carefully designed metal structure, with small elements called strain gauges, mounted in precise locations on the structure. Load cells are designed to measure a specific type of force, and ignore other forces being applied. The electrical signal output by the load cell is very small and requires specialised amplification. Fortunately, the 1046 PhidgetBridge will perform all the amplification and measurement of the electrical output.

    Load cells are designed to measure force in one direction. They will often measure force in other directions, but the sensor sensitivity will be different, since parts of the load cell operating under compression are now in tension, and vice versa.

    This Single Point Load Cell is often used in small, high-precision scales. It’s mounted by bolting down the end of the load cell where the wires are attached and applying force on the other end. Where the force is applied is not critical, as this load cell measures a shearing effect on the beam, not the bending of the beam. If you mount a small platform on the load cell, as would be done in a small scale, this load cell provides accurate readings regardless of the position of the load on the platform.

    Connection

    The 3139 connects to a bridge on the 1046 – PhidgetBridge 4-Input

    The following table shows how to connect the Load Cell Wires to the bridge connectors.

    Wire Color Red Green White Black/Yellow
    Bridge Connector 5V + - GND


    Sensor Properties

    Sensor Type Shear Load Cell
    Weight Capacity Max 100 g
    Maximum Overload 120 g
    Cell Repeatability Error Max ± 50 mg
    Cell Non-Linearity Max 50 mg
    Cell Hysteresis Max 50 mg


    Electrical Properties

    Rated Output 600 μV/V
    Rated Output Error Max ± 150 μV/V
    Output Impedance 1 kΩ
    Creep 100 mg/hr
    Temperature Effect on Zero 5 mg/°C
    Temperature Effect on Span 5 mg/°C
    Supply Voltage Min 3 V DC
    Supply Voltage Max 10 V DC
    Zero Balance Ratio ± 100 μV/V


    Physical Properties

    Operating Temperature Min -10 °C
    Operating Temperature Max 40 °C
    Compensated Temperature Min -10 °C
    Compensated Temperature Max 60 °C
    Cable Length 110 mm
    Cable Gauge 4x 30 AWG
    Material Aluminium Alloy (LY12CZ)
    Screw Thread Size 2.5M
    Weight 3.2 g


    Resources




    We Also Recommend

    Sale

    Unavailable

    Sold Out