Cart 0

10.1 Inch HDMI LCD 1280x800 (D) Capacitive Touch Screen (with case)

  • $179.00AUD
  • Save $20
  • (Exc. GST)

  • Out of Stock

  • Shopify secure badge
  • $ We Ship Worldwide from AU (Perth), and Prices (AUD) are Exc. GST
  • $ We Offer Further Discounts for Higher Quantities & Large Orders (Request for Quote)
  • $ We Accept Purchase Orders & Net30 Payment for Educational Institutes
  • 10.1 Inch HDMI LCD 1280x800 (D) Capacitive Touch Screen (with case)


    • 10.1inch IPS screen,1280x800 high resolution
    • Toughened glass capacitive touch panel, 6H hardness
    • Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers
      • When works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free
      • When work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free
    • Play videos via USB flash drive, supported formats include MP4, AVI, RMVB, etc.
    • Dual HDMI ports, one-key switching without frequent plugging
    • Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc.
      • Controlled via infrared remote controller OR onboard buttons
    • 3.5mm audio jack supports HDMI audio output
    • Embedded ferrite Hi-Fi speaker
    • Also supports VGA input 
    • 100x100mm spacing mounting holes (M4 screw hole) for general wall mount
    • Comes with 45° tilt angle stand

    Package Includes:

    1. 10.1inch HDMI LCD (D) (with case) x1
    2. Infrared remote controller x1
    3. Power adapter 12V x1
    4. HDMI cable x1
    5. USB type A receptacle to micro B plug cable x1
    6. USB type A plug to micro B plug cable x1
    7. DVD x1

    External Dimension



    Why doesn't the LCD work with my Raspbian?
    To use the LCD with the Raspberry Pi official image, the driver should be installed first. Please refer to the user manual.
    However, for the first testing, you may want to use the provided image directly. 
    Why the LCD still doesn't work with the provided image
    Make sure the hardware connection is correct and connects fine.
    Make sure the image in TF card is burnt correctly.
    The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact. 
    Which power supply should I use? 
    It is recommended to use a 5V/2A power adapter for the Raspberry Pi other than USB connection, otherwise, the Pi may fail to start up because the PC's USB port might have not enough power.
    For large size LCDs, say, 10 inches diagonal or more, another stand-alone power adapter is also required to provide power to the LCD.

    Link to Wiki


    We Also Recommend



    Sold Out