Industrial IOT Solutions, Customisation and Integration to Suit Your Requirements

Cart 0

2A DC Motor Controller Phidget - DCC1001

  • $59.00
  • Save $20
  • (Exc. GST)

  • Available in stock

  • Shopify secure badge
  • $ We Ship Worldwide from AU (Perth), and Prices (AUD) are Exc. GST
  • $ We Offer Further Discounts for Higher Quantities & Large Orders (Request for Quote)
  • $ We Accept Purchase Orders & Net30 Payment for Educational Institutes
  • 2A DC Motor Controller Phidget - DCC1001

    Control a single DC motor with this compact and affordable Phidget. Connects to a VINT port.

    The DCC1001 gives you complete control of one medium sized DC motor from one of the ports on your VINT hub. You can control motor velocity, acceleration and braking strength using commands from your software. The compact and enclosed form factor of the DCC1001 makes it easy for this Phidget to fit in smaller projects while still controlling motors with current ratings of up to 2 amps. See the "Compatible Products" tab for a list of devices with VINT ports that can connect to this Phidget.

    Quadrature Encoder Input

    This controller comes equipped with an encoder input that can read in the quadrature signal from an encoder attached to the shaft of your motor. Using the MotorPositionController object in our API, you can use the encoder to implement a PID control loop.

    Reliability and Protection

    A built-in heatsink on this controller prevents it from overheating during operation.

    The VINT port on this device is isolated from the rest of the board, greatly improving reliability and eliminating ground loops. Your VINT Hub and computer will also be safe in the event of a current spike coming back from the motor.

    The power terminals on this device are polarity protected: if you happen to hook up the power supply backwards, the device simply won't power up and won't be damaged. There is also a 5A fuse included on-board to protect the controller in an over-current event.

    Product Specifications

    Board Properties
    Controlled By VINT
    Controller Properties
    Motor Type DC Motor
    Number of Motor Ports 1
    Acceleration Min 0.1 % Duty Cycle/s
    Acceleration Max 100 % Duty Cycle/s
    PWM Frequency 25 kHz
    Sampling Interval Min 100 ms/sample
    Sampling Interval Max 60 s/sample
    Acceleration Resolution 0.1 Duty Cycle/s
    Velocity Resolution 0.001 Duty Cycle
    Current Limit Resolution 5.6 mA
    Acceleration Time Min 20 ms
    Acceleration Time Max 20 s
    Electrical Properties
    Continuous Motor Current Max 2 A
    Supply Voltage Min 8 V DC
    Supply Voltage Max 30 V DC
    Current Consumption (Unconfigured) (VINT Port) 500 μA
    Current Consumption Max (VINT Port) 2 mA
    Power Consumption (Unconfigured) 288 mW
    Power Consumption motor power plus 700 mW
    Encoder Interface
    Number of Encoder Inputs 1
    Encoder Interface Resolution x4
    Count Rate Max 400000 pulses/s
    Sampling Interval Min 50 ms/sample
    Sampling Interval Max 60 s/sample
    Encoder Input Low Voltage Max 2.4 V DC
    Encoder Input High Voltage Min 2.6 V DC
    Time Resolution 1 μs
    Physical Properties
    Recommended Wire Size 16 - 26 AWG
    Operating Temperature Min -40 °C
    Operating Temperature Max 85 °C




    We Also Recommend



    Sold Out