Cart 0

7.5 inch E-Ink Display HAT for Raspberry Pi 640x384 Three Colours

  • $99.00AUD
  • Save $20
  • (Exc. GST)

  • Available in stock

  • Shopify secure badge
  • $ We Ship Worldwide from AU (Perth), and Prices (AUD) are Exc. GST
  • $ We Offer Further Discounts for Higher Quantities & Large Orders (Request for Quote)
  • $ We Accept Purchase Orders & Net30 Payment for Educational Institutes
  • 7.5 inch E-Ink Display HAT for Raspberry Pi 640x384 Three Colours

    This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 640x384 resolution, with an embedded controller, communicating via SPI interface, supports red, black, and white three-color display.

    Due to the advantages like ultra-low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.


    • No backlight, keeps displaying last content for a long time even when power down
    • Ultra low power consumption, basically power is only required for refreshing
    • Compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W
    • SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
    • Onboard voltage translator, compatible with 3.3V/5V MCUs
    • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)


    • Operating voltage: 3.3V~5V
    • Interface: SPI
    • Outline dimension: 170.2mm × 111.2mm
    • Display size: 163.2mm × 97.92mm
    • Dot pitch: 0.255 × 0.255
    • Resolution: 640 × 384
    • Display color: red, black, white
    • Grey level: 2
    • Full refresh time: 16s
    • Refresh power: 38mW(typ.)
    • Standby power: <0.017mW
    • Viewing angle: >170°


    VCC 3.3V~5V
    GND Ground
    DIN SPI MOSI pin
    CLK SPI SCK pin
    CS SPI chip selection, low active
    DC Data/Command selection (high for data, low for command)
    RST External reset, low active
    BUSY Busy status output, low active


    7.5inch e-Paper HAT dimensions

    Development Resources


    Package Content:

    1. 7.5inch e-Paper (B) x1
    2. e-Paper Driver HAT x1
    3. RPi screws pack (2pcs) x1
    4. PH2.0 20cm 8Pin x1


    We Also Recommend



    Sold Out