Cart 0

7 Inch 1024x600 Capacitive Touch Screen DIY Kit

  • $85.00AUD
  • Save $15
  • (Inc. GST: $93.50AUD)

  • Available in stock

  • Shopify secure badge
  • $ We Ship Worldwide from AU (Perth), and Prices (AUD) are Exc. GST
  • $ Contact Us! We Offer Further Discounts for Resellers & Large Orders
  • $ Further Special Discounts for Educational Institutes & Net30 Payment
  • 7 Inch 1024x600 Capacitive Touch Screen DIY Kit

    This is a new DIY kit for all makers; it is a fantastic HDMI monitor with capacitive touchscreen and driver free. We added a CTP driver board and provided a capacitive touchscreen to make it a whole new suite. After that, you don't need to calibrate your touchscreen and make your 7-inch display a touchscreen. It's been tested on Raspberry Pi, beagle bone black, PC and Mac book. And it works well on those platforms and it is really plug and play


    • It supports 1024x600 resolution and supports approximate 30fps, maximum 60fps

    • The capacitive touch function gives the user full control over any device.

    • It's driver free for your device due to built-in EDID device information.

    • It is very easy to let the equipment correctly identified the touchscreen.

    • The Capacitive USB touch screen can support functions of the right mouse button and drag and drop.

    • It can support multipoint touch, maximum 10 points. (Only test in windows 10)


    Connection Details

    The CTP driver board has two USB port type, one of them is a MicroUSB cable on the right side. 

    (Both of them are available for your touchscreen, one of them should be connected to the output device.)

    Work with Raspberry Pi

    If you are using Raspberry Pi, you can change resolution by these steps:

    Login to your Raspberry Pi and edit /boot/config.txt file, make sure it has following parameter:




    hdmi_cvt 1024 600 60 3 0 0 0

    Save it and reboot your system.


    If the touch screen is out of work please make sure you connect the Display’s MicroUSB Port to your device (PC, Raspberry Pi, Beagle bone black etc.)


    We are not sure it can work at android system due to it does not test in Android OS yet. 


    If you find that the screen has blur when you connect it to your device, please check the FPC cable on the back of driver board, it may loose when it was shipping to you. Just pull out the block of the FPC cable and put the FPC wires into it and make sure it fasten tightly and retry it again. Please take care of this cabin cable; it’s connected to the board and sends the touch screen data to the chip on the board. 

    Technical Details

    Dimensions 265mm x 165mm x 50mm
    Weight G.W 410g    
    Battery Exclude
    Operating voltage 5V (current requirement 2A), 9V@1.5A(Recommended), 12V@1A
    Rated power 6-7W
    Signal input AV + VGA + HDMI (HDMI 1.2)
    Resolution 1024 * 600
    Plug and Play free driver
    OSD language Simplified Chinese, Traditional Chinese, English, Japanese, Korean, Spanish, French, German, Italian, Portuguese
    Control Multi-function OSD operation or potentiometer adjust the brightness and color
    Using mature program clear display
    Multipoint touch, maximum 10 points (Only test in windows 10)
    Support image flip up and down the image can conversion 4: 3 / 16: 9 display format
    Support 30fps maximum 60fps

    Part List

    7 inch 1024x600 High-Resolution Screen 1
    7-inch Capacitive Touch Panel 1
    HDMI/VGA/S-Video Video driver board 1
    CTP driver board (Capacitive Touch Panel Driver board) 1
    Keyboard 1
    Keyboard cable wire 1
    Driver board Power supply cable wire 1
    USB touchscreen cable wire 1

    We Also Recommend



    Sold Out