Menu
Cart 0

Adafruit Vibrating Mini Motor Disc

  • $4.00AUD
  • Save $3.50AUD


Adafruit Vibrating Mini Motor Disc

*BZZZZZZZZZZ* Feel that? That's your little buzzing motor, and for any haptic feedback project, you'll want to pick up a few of them. These vibe motors are tiny discs, completely sealed up so they're easy to use and embed. 

Two wires are used to control/power the vibe. Simply provide power from a battery or microcontroller pin (red is positive, blue is negative) and it will buzz away. Works from 2V up to 5V, higher voltages result in the more current draw but also a stronger vibration. 

If you want to reduce the current draw/strength (for example, to control it directly from an Arduino pin) try putting a resistor (100 to 1000 ohms) in series. For full power control, a small PN2222 transistor can control a motor easily, some experimentation may be required!

Technical Details

  • Dimension: 10mm diameter, 2.7mm thick
  • Voltage: 2V - 5V
  • 5V current draw: 100mA, 4V current draw: 80mA, 3V current draw: 60mA, 2V current draw: 40mA
  • 11000 RPM at 5V
  • Weight: 0.9 gram

We Also Recommend

Sale

Unavailable

Sold Out