Menu
Cart 0

Brushless DC Motor Phidget - DCC1100_0

  • $99.00AUD
  • Save $10AUD
  • (Exc. GST)


  • Available in stock

  • Shopify secure badge
  • $ We Ship Worldwide from AU (Perth), and Prices (AUD) are Exc. GST
  • $ We Offer Further Discounts for Resellers & Large Orders
  • $ We Accept Purchase Orders & Net30 Payment for Educational Institutes
  • Brushless DC Motor Phidget - DCC1100_0

    Brushless DC motors have several advantages over their brushed counterparts: They have longer lifespans, run quieter, and have built-in position control thanks to the hall-effect sensor that tells the controller which coil to activate. Based on this feedback, the controller selects which coil to activate, which causes the rotor to be pulled into place.

    The DCC1100 requires a 8-30V DC external power supply and can control a single brushless DC motor from a port on your VINT Hub (see the Compatible Products tab for a list of hubs). In software you can either control the motor velocity, acceleration and stall velocity directly, or you can use the position controller object to set the motor position using our closed-loop PID controller. For more information on how to use and configure the position controller, take a look at the technical section of the DCC1100 User Guide.

    Safety and Reliability

    The DCC1100 has been designed with safety in mind:

    • An on-board temperature chip is accessible via the TemperatureSensor object, so your program will be able to watch out for overheating.
    • The VINT port is electrically isolated from the rest of the board, making it simple to build a Phidgets system without having to worry about ground loops or damage to your hub or computer.
    • A fuse is included on-board for safety in case of power surges.

    Hall-Effect Input

    3019 Cable Motor Wire
    Black Ground
    Green Hall-Effect 'C'
    White Hall-Effect 'B'
    Red +5V
    Brown Hall-Effect 'A'

     

    To make connection simple, the DCC1100 has a 5-pin molex connector to interface with the motor's hall-effect output. All BLDC motors sold at Phidgets have the mating connector soldered to the end of the cable. If you have your own motor, you can cut a Phidget Encoder cable in half and solder them together

    Product Specifications

    Board Properties
    Controlled By VINT
    Electrical Properties
    Supply Voltage Min 8 V DC
    Supply Voltage Max 30 V DC
    Current Consumption (Unconfigured) (VINT Port) 500 μA
    Current Consumption Max (VINT Port) 650 μA
    Continuous Motor Current Max 20 A
    Controller Properties
    Motor Type Brushless DC
    Number of Motor Ports 1
    Velocity Resolution 0.003 Duty Cycle
    Hall-Effect Sensor
    Hall-Effect Voltage 5 V DC
    Physical Properties
    Operating Temperature Min -40 °C
    Operating Temperature Max 85 °C

     

    Documents

    Library & Driver Downloads

     


    We Also Recommend

    Sale

    Unavailable

    Sold Out