Massive Mega Sale is LIVE NOW!

Menu
Cart 0

LoRa Dual Channels IoT Gateway OpenWrt LG02

  • $139.00
  • Save $60
  • (Exc. GST)


  • Available in stock

  • Shopify secure badge
  • $ We Ship Worldwide from AU (Perth), and Prices (AUD) are Exc. GST
  • $ We Offer Further Discounts for Higher Quantities & Large Orders (Request for Quote)
  • $ We Accept Purchase Orders & Net30 Payment for Educational Institutes
  • LoRa Dual Channels IoT Gateway OpenWrt LG02

    The LoRa OpenWrt IoT Gateway LG02 is an open source dual channels LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity.

    LG02 has Rich Internet Connection method such as WiFi interface, Ethernet port and USB host port. These Interfaces provide flexible methods for users to connect their sensor networks to the Internet.

    LG02 can support the LoRaWAN protocol in single frequency and customized LoRa transmit protocol. The design of LG02 is using the Linux to directly control two sx1276/sx1278 LoRa modules which lets the LoRa can works in full duplex LoRa mode and increase the communication efficiency.


    LG02 can be used to provide a low-cost IoT wireless solution to support 50~300 sensor nodes.

    Except LoRaWAN mode, LG02 can support multiple working modes such as: LoRa repeater mode, MQTT mode, TCP/IP Client mode, TCP/IP Server mode to fit different requirement for IoT connection. Click this link for more info about the modes.

    LG02 base on sx1276 solution which provides a low cost for your IoT network connection. Compare to the cost with a normal SX1301 LoRaWAN solution. the LG02 is only of its 1/4 or less cost. This makes the LG02 very suitable to set up small scale LoRa network or use it to extend the coverage of current LoRaWAN network.

    Features:

    • Open Source OpenWrt system
    • Low power consumption
    • Firmware upgrade via Web
    • Software upgradable via network
    • Flexible protocol to connect to IoT servers
    • Auto-Provisioning
    • Built-in web server
    • Managed by Web GUI, SSH via LAN or WiFi
    • Internet connection via LAN, WiFi, 3G or 4G
    • Failsafe design provides a robust system
    • 2 x SX1276/SX1278 LoRa modules
    • Full–duplex LoRa transceiver
    • Two receive channels, and one transmit channel
    • Limited support in LoRaWAN/ Support Private LoRa protocol
    • Support up to 300 nodes
    • LoRa band available at 433/868/915/920 Mhz
    • Max range in LoRa: 5~10 km. Density Area:>500m

    Applications:

    • Wireless Alarm and Security Systems
    • Home and Building Automation
    • Automated Meter Reading
    • Industrial Monitoring and Control
    • Long range Irrigation Systems
    • GPS tracker, etc
    • LoRaWAN Repeater

      Specifications:

      Linux Side:

      • Processor: 400MHz, 24K MIPS
      • Flash: 16MB; RAM: 64MB

      MCU/LoRa Side:

      • MCU: ATMega328P
      • Flash:32KB, RAM:2KB
      • LoRa Chip: SX2176/78

      Cellular 4G LTE (optional):

      • Quectel EC20 LTE module 
      • Micro SIM Slot
      • Internal 4G Antenna + External 4G Sticker Antenna.
      • Up to 100Mbps downlink and 50Mbps uplink data rates
      • Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
      • MIMO technology meets demands for data rate and link reliability in modem wireless communication systems

      Interfaces:

      • 10M/100M RJ45 Ports x 2
      • WiFi : 802.11 b/g/n
      • LoRa Wireless
      • Power Input: 12V DC
      • USB 2.0 host connector x 1
      • USB 2.0 host internal interface x 1
      • 14 position screw terminal

      References:

      Other Dragino Documentations 

       


      We Also Recommend

      Sale

      Unavailable

      Sold Out