MB7040 I2CXL-MaxSonar-WR MaxBotix Ultrasonic Sensor
MB7040 I2CXL-MaxSonar-WR MaxBotix Ultrasonic Sensor
Ranges from 20cm to 765cm with up to 40Hz read rate. Reports range to the closest target.
The industrial outdoor MB7040 I2CXL-MaxSonar-WR sensors have a robust PVC housing designed to meet IP67 water intrusion. The sensors provide short to long distance detection and ranging with a narrow beam pattern. The I2CXL‑MaxSonar‑WR outdoor ultrasonic sensors have high power output, noise rejection, auto calibration, and factory calibrated beam patterns
In addition to the standard I2CXL‑MaxSonar‑WR, MaxBotix Inc., has developed the F‑Option for additional protection necessary in a few hazardous chemical environments. Extremely corrosive gases or liquids can degrade or compromise the operation of the sensing unit. As a result, we offer a more chemically inert seal which allows Maxbotix sensors to operate in all but the harshest of chemical environments. In addition to the chemical resistance the sensor has improved performance in wet or dust environments.
Housing Option Available: (Specify in order note)
- 3/4" NPS WR Housing
- 3/4" NPS WRC Compact Housing
- Ultra Compact Housing
- Ultra Compact Housing Flush Mount
- 1" NPS Housing
- 1" BSPP Housing
- 30MM 1.5 Housing
Standard Weather Resistant Models
The exposed materials of a properly mounted I2CXL-MaxSonar-WR sensor are: Aluminum (oxidized surface), PVC, & silicone rubber (VMQ).
The exposed materials of a properly mounted XL-MaxSonar-WR sensor with the F-Option (IP68) added are: Aluminum (oxidized surface), PVC, & Flourosilicone (with an additional back up FEP Teflon® seal).
To ensure long term operation of the sensor, terminal connections should not be exposed to water, dust, or other chemicals. Follow proper mounting when installing your sensor. This is easily accomplished using standard PVC pipe fittings which match the provided mounting threads. MB7950 Mounting hardware can be purchased along with your sensor for the 3/4 NPS threading.
Sensors are designed for operation in air, but may work well in many gases. Testing for proper operation is encouraged. Compensation for speed of sound changes in other gases should be applied to sensor output, this is often accomplished through a simple 2‑point linear calibration.
The industrial XL‑MaxSonar‑WR products are the highest quality for cost outdoor ultrasonic sensors on the market. They provide an industrial component module solution that offers easy to use outputs, weather & dust resistance, no sensor dead zone, calibrated narrow beam patterns, stable range readings, low power demands, and a host of other features detailed in the product datasheets.
The I2CXL-MaxSonar-WR sensors represent an industrial revolution that has already found use in a number of advanced or industrial solutions where ultrasonic sensors have not been historically considered a viable solution due to unstable readings, high cost, and high power requirements.
The Noise Filtering
The sensor dynamically adjusts its sensitivity to compensate for outside electrical & acoustic noise sources.
The I2CXL‑MaxSonar‑WR interface was designed to be very easy and intuitive to use. Communication is provided over the I2C bus, featuring a very simple command set.
The Power Requirements
The I2CXL‑MaxSonar‑WR functions throughout a 3.0V to 5.5V operational voltage range. This allows for easy integration at either 3.3V or 5V and means that users of low voltage microcontrollers, or those who wish to operate in solar or battery based systems do not have to provide an extra power supply for the sensor.
The I2CXL‑MaxSonar‑WR sensors have a 4.4mA average current draw during free ranging operation.
The Controlled Narrow Beam Shape
Similar ultrasonic products may have frequent side lobe detection and can even falsely trigger on objects behind or to the sides of the sensor. The I2CXL‑MaxSonar‑WR offers a controlled narrow beam that is designed to reject small objects (clutter) outside of the central beam area and provides long-range sensitivity without detecting frivolous or unwanted targets
Each I2CXL‑MaxSonar‑WR is tested for proper operation at Maxbotix facility and comes with a factory calibrated narrow beam pattern to help ensure consistent operation of the sensor even from part to part.
The I2CXL‑MaxSonar‑WR automatically calibrates to its environment before every range reading. This calibration includes compensation for voltage, humidity, acoustic noise, and electrical noise conditions. Temperature compensation for speed of sound changes are not applied.
- Resolution of 1 cm
- Up to 40Hz reading rate
- Simple I2C bus interface
- Easy control of multiple sensors
- Control up to 127 sensors using two wires
- 42kHz Ultrasonic sensor measures distance to objects
- RoHS Compliant
- I2C Bus interface
- Operates from 3.0-5.5V
- Low 3.4mA average current requirement
- Small, light weight module
- Designed for easy integration into your project or product
- Operational Temperature from -40˚C to +70˚C (-40˚F to +160˚F)
- Real-time automatic calibration (voltage, humidity, ambient noise)
- Firmware filtering for better noise tolerance and clutter rejection
- 200,000+ Hours Mean Time Between Failure
- Weather Resistant (IP67), optional Chemical Resistant F-Option
- Available in multiple mounting packages – 3/4″ NPS, Ultra-Compact, 1″ NPS, 1″ BSPP, 30mm1.5
- IP67 rated, I2C interface ultrasonic sensor
- Maximum range of 765 cm (300 inches)
- Long-range, narrow detection zone
|Using an I2C-MaxSonar With an Arduino|
|Sensor Selection Guide|
|RoHS Declaration of Conformity|
|CE Declaration of Conformity|
We Also Recommend
Globalsat LS-113P LoRaWAN Compliant PM2.5, Temperature & Humidity Sensor
R718IJK LoRaWAN Wireless Multi-Sensor Interface For Industrial Sensors
Ursalink UC11-T1 LoRaWAN Temperature & Humidity Sensor Battery Powered
LSN50v2-S31 LoRaWAN Waterproof Temperature and Humidity Sensor
OpenAIC Programmable AI Camera Kit, 3872×2180 Pixels, OpenVINO IR
R718KA Netvox LoRaWAN Wireless mA Current Meter Interface 4~20mA