MEGA DEALS! NOW ON (LIMITED TIME!)

Menu
Cart 0

Particle Argon IoT Development Board

  • $45.00AUD

  • Available in stock

  • Shopify secure badge
  • $ We Ship Worldwide from AU (Perth), and Prices (AUD) are Exc. GST
  • $ We Offer Further Discounts for Higher Quantities & Large Orders (Request for Quote)
  • $ We Accept Purchase Orders & Net30 Payment for Educational Institutes
  • Particle Argon IoT Development Board

    The Particle Argon is an IoT development board that allows you to connect your mesh network to Wi-Fi. With the Nordic nRF52840 SoC and an ESP32 you have all the power of an ARM Cortex M4 with OpenThread mesh networking, Wi-Fi (b/g/n), NFC, plenty of GPIOs, LiPo charging and more. The board is designed to act as a standalone Wi-Fi endpoint or a Wi-Fi enabled gateway for a Particle Mesh network.

    The Argon is also configured in the popular Feather footprint making it also compatible with Feather Shields! That means it includes a JST connector for a LiPo battery as well as charging of the battery over USB. Particle also provides an RGB status LED and a JTAG (SWD) connector for debugging and an onboard PCB antenna for your mesh network (you will need a U.FL antenna for NFC or Wi-Fi)

    The Argon comes with access to the Device Cloud (10 free micro networks available) as well as three free months of device Cloud access using a cellular gateway. The Particle Could has some great features for building connected projects, including over-the-air firmware updates, and easy-to-use REST API, and firmware development supported by web and local IDEs.

    Features:

    • Espressif ESP32-D0WD 2.4GHz Wi-Fi coprocessor
      • On-board 4MB flash for eSP32
      • 802.11 b/g/n support
      • 802.11 n (2.4GHz), up to 150Mbps
    • Nordic Semiconductor nRF52840 SoC
      • ARM Cortex-M4F 32-bit processor @ 64MHz
      • 1MB flash, 256KB RAM
      • IEEE 802.15.4 - 2006: 250Kbps
      • Bluetooth 5: 2Mbps, 1Mbps, 500Kbps, 125Kbps
      • Supports DSP insturctions, HW accelerated Floating Point Unit (FPU) calculations
      • ARM TrustZone CryptoCell-310 Cryptographic and security module
      • Up to +8 dBm TX power (down to -20dBm in 4dB steps)
      • NFC-A tag
    • On-board additional 4MB SPI flash
    • 20 mixed signal GPIO (6x Analog, 8x PWM), UART, I2C, SPI
    • Integrated Li-Po charging and battery connector
    • JTAG (SWD) Connector
    • RGB status LED
    • Reset and Mode buttons
    • On-board PCB antenna for mesh network
    • u.FL connectors for external antennas for mesh network, Wi-Fi, and NFC
    • FCC, CE, and IC certified. RoHS compliant

    Documents:

     

     


    We Also Recommend

    Sale

    Unavailable

    Sold Out