Cart 0

Phidget Encoder High Speed 4-Input -1047_1

  • $155.00AUD
  • Save $30

PhidgetEncoder HighSpeed 4-Input -1047_1

Read up to four encoders simultaneously with this Encoder Interface. You can read limit switches or other simple sensors with the digital inputs.

The PhidgetEncoder Highspeed 4-Input can be used with a wide assortment of mechanical and optical encoders. The encoder should be of quadrature output type, indicating that there will be two quadrature output channels (usually labelled A and B) and an optional third output channel to signal when the index pin (a reference point for zero position or a complete revolution) has been reached.

The PhidgetEncoder Highspeed 4-Input is able to read four encoders simultaneously. Encoders are not powered up until all initialization of the device is complete. It is possible to enable some or all encoders, depending on how many of the channels are being used. This can also be used to reduce power consumption when certain encoders are not needed.

The PhidgetEncoder Highspeed 4-Input has the added ability to time the duration between a group of quadrature changes. The time is returned in microseconds. This time value can be used to calculate velocity and acceleration.

Both mechanical and optical encoders are available, with optical encoders dominating at > 100 counts per second. Review the data sheet for the encoder you are planning to use to ensure it is compatible with the PhidgetEncoder Highspeed 4-Input. Almost any incremental quadrature encoder will work but it is important to verify this before connecting it to the Phidget. Absolute encoders will not work with this device. Ideally, you should choose a quadrature encoder with a 5-pin output and the following pinout in order to be directly compatible with the 1047.

This particular revision of the 1047 has improved power switches to enhance system stability when turning off and on separate encoder inputs. It also has updated firmware with a few minor bug fixes.

Related Products

If you only need a single encoder, check out the 1057 - PhidgetEncoder HighSpeed.

Comes Packaged with:

            Product Specifications

            Encoder Interface

            API Object Name Encoder
            Number of Encoder Inputs 4
            Count Rate Max 1E+06 pulses/s
            Encoder Interface Resolution x4
            Update Rate 125 samples/s
            Time Resolution 1 μs
            Encoder Input Low Voltage Max 800 mV DC
            Encoder Input High Voltage Min 2.1 V DC
            USB Speed Full Speed

            Electrical Properties

            Encoder Pull-up Resistance 10 kΩ
            Current Consumption Max 470 mA
            Current Consumption Max (per encoder) 200 mA
            Current Consumption Min 30 mA
            USB Voltage Min 4.8 V DC
            USB Voltage Max 5.3 V DC

            Physical Properties

            Recommended Wire Size 16 - 26 AWG
            Operating Temperature Min 0 °C
            Operating Temperature Max 70 °C

            Digital Inputs

            Number of Digital Inputs 4
            Pull-up Resistance 15 kΩ
            Low Voltage Max (True) 800 mV DC
            High Voltage Min (False) 2.1 V DC
            Low Voltage Trigger Length Min 4 ms
            High Voltage Trigger Length Min 16 ms
            Digital Input Voltage Max ± 15 V DC
            Digital Input Update Rate 125 samples/s


            Further information on the Product Page.

            We Also Recommend



            Sold Out