Phidget SBC 4 - Single Board Computer - SBC3003_0
Phidget SBC 4 - Single Board Computer - SBC3003_0
Single Board Computer running Debian with 3 high-speed USB ports and 6 VINT ports. 512 MiB SDRAM and 16 GB SD Card.
The VINT SBC exposes an easy to use interface for setting up and running custom applications on-board. This allows the VINT SBC to operate autonomously, without the need for a graphical interface or a consistent remote connection.
The SBC4 is an embedded computer that runs Debian GNU/Linux. We provide full shell access via a built-in SSH server, access to the full Debian package repository, and all of the standard command line tools expected on a modern Linux system.
VINT Ports
With the Phidget SBC4, you can connect six devices and make them available over the network. Each VINT port can perform one of four roles: Communicating with an intelligent VINT Device, reading a 0-5V Voltage or ratiometric sensor, acting as a digital output, or reading switches as a digital input. Each port has a power and ground pin, so you can also use the ports to gain access to the SBC's 5V supply.
Plug in one of our many VINT-enabled Phidgets that perform a wide variety of functions. Control motors and LEDs, measure temperature or motion, or build a large scale system with many inputs and outputs.
USB Ports
With its three high-speed USB ports, you can connect a variety of useful devices: USB Phidgets, webcams, keyboards, wifi adapters, and more!
MicroSD Card
The SBC4 comes equipped with a MicroSD card port and 16GB card which gives you plenty of storage space and easy access to your progams and files. The card comes pre-loaded with the operating system and Phidgets drivers.
HDMI Port
The HDMI port on the SBC4 gives it the capability to connect to a monitor to display its Linux terminal. Combined with a USB keyboard, you can type commands or provide program input directly without the need for remoting in via SSH.
Product Specifications
| SBC | |
|---|---|
| CPU | Allwinner A20 |
| Core | Dual-Core ARM Cortex-A7 |
| CPU Speed | **Up to 960 MHz |
| SDRAM Size | 512 MiB |
| Boot Time | 20 s |
| Ethernet Cable | 10/100BASE-T |
| Electrical Properties | |
| Supply Voltage Min | 6 V DC |
| Supply Voltage Max | 30 V DC |
| Current Consumption Max | 2 A |
| Current Consumption Min | 100 μA |
| Available External Voltage | 5 V DC |
| Available External Current | 500 mA |
| USB Hub | |
| Number of USB Ports | 3 |
| USB Speed | High Speed |
| Available Current per USB Port | 500 mA |
| Board | |
| Number of VINT Ports | 6 |
| Power Jack | 5.5x2.1mm, Center Positive |
| Operating Temperature Min | 0 °C |
| Operating Temperature Max | 70 °C |
| Voltage Inputs | |
| Number of Voltage Inputs | 6 (Shared) |
| Voltage Input Resolution | * 16 bit |
| Sensor Input Impedance | 324 Ω |
| Input Voltage Min (DC) | 0 V DC |
| Input Voltage Max (DC) | 5 V DC |
| Voltage Input Noise | ± 630 μV DC |
| Sampling Interval Max | 60 s/sample |
| Sampling Interval Min | 1 ms/sample |
| Digital Inputs | |
| Number of Digital Inputs | 6 (Shared) |
| Pull-up Resistance | 124 kΩ |
| Low Voltage Max (True) | 1 V DC |
| High Voltage Min (False) | 1.8 V DC |
| High Voltage Trigger Length Min | 3 ms |
| Low Voltage Trigger Length Min | 3 ms |
| Digital Input Voltage Max | 5.5 V DC |
| Digital Input Type | Switch (Active Low) |
| Digital Outputs | |
| Number of Digital Outputs | 6 (Shared) |
| Series Resistance | 510 Ω |
| Digital Output Available Current | 81 mA |
| Digital Output Voltage Min | 0 V DC |
| Digital Output Voltage Max | 3.3 V DC |
| PWM Frequency Max | 50 kHz |
| PWM Resolution | 0.8 % |
*Voltage measured with a 10-bit ADC, oversampled to 16-bits.
**This processor supports dynamic frequency scaling, which lowers the clock speed to save power depending on processing load.
