Menu
Cart 0

Phidget Interface Kit 0/16/16 - 1012_2

  • $165.00AUD
  • Save $25


PhidgetInterfaceKit 0/16/16 - 1012_2

Use it to check the state of switches, push buttons, relays and/or to switch relays, solenoids, motors and even high power LEDs.

Digital Inputs

The Digital Inputs are activated by an external voltage source, triggering on a wide voltage range - 4 to 30VDC. They provide built-in filtering, to eliminate false triggering from electrical noise. They can be used to convey the state of on/off devices, such as pushbuttons, limit switches, relays.

Digital Outputs

The Open Collector Digital Outputs can be used to directly control substantial devices, switching up to 30VDC at up to 2 Amps. The Output acts as a switch to ground, so the circuit you're switching will need an external power supply. Each output is protected from transient voltages typical when switching inductive devices - relays, solenoids, motors. The Outputs can be used to directly control devices requiring substantial power such as incandescent lights, high power LEDs, relays, solenoids, motors.

Product Specifications

Board

API Object Name InterfaceKit
USB Voltage Min 4.6 V DC
USB Voltage Max 5.5 V DC
Current Consumption Min 14 mA
Current Consumption Max 500 mA
Available External Current 394 mA
Recommended Wire Size 16 - 26 AWG
USB Speed Low Speed
Operating Temperature Min 0 °C
Operating Temperature Max 70 °C


Digital Inputs

Number of Digital Inputs 16
Digital Input Impedance 10 kΩ
Low Voltage Max (False) 900 mV DC
High Voltage Min (True) 4.2 V DC
Low Voltage Trigger Length Min 16 ms
High Voltage Trigger Length Min 4 ms
Digital Input Voltage Max ± 30 V DC
Digital Input Update Rate 125 samples/s


Digital Outputs

Number of Open Collector Digital Outputs 16
Series Resistance 200 mΩ
Open Collector Voltage Max 30 V DC
Digital Output Current Sinking Max (per channel) 2 A
Resources

    Further information on the Product Page.


    We Also Recommend

    Sale

    Unavailable

    Sold Out