Industrial IOT, Sensing & Control Solutions, and Integration to Suit Your Requirements.

Cart 0

RAK7204 LoRaWAN Environmental Sensor - AU915 AS923 MHz

  • $109.00
  • Save $10
  • (Exc. GST)

  • Available in stock

  • Shopify secure badge
  • $ We Ship from our stock in AU (Perth), and Prices (AUD) are Exc. GST
  • $ We Offer Quantity Discounts for Large Orders (Request for Quote)
  • $ We Accept Purchase Orders & Net30 Payment for Educational Institutes

    RAK7204 LoRaWAN Environmental Sensor  - AU915 AS923 MHz

    The RAK7204 is a LoRaWAN node that serves as an environmental monitoring station. The high-precision sensors, can measure changes in temperature, humidity, gas pressure and provide an indoor air quality index.
    All the accumulated data can be sent to a LoRaWAN Gateway in order for it to be forwarded to the Cloud. Because of its design, the RAK7204 can achieve a very low power consumption rate, which with the included non-rechargeable battery allows for 2+ years of operation.
    The firmware has built-in functionality that allows the user to adjust the sampling interval of the sensors and the transmission cycle.
    Last but not least, the RAK7204 adopts highly integrated design, fitting the electronics and battery within a 90x85x34mm sized housing.

    Key Features

    • Measurement of a variety of environmental parameters
      • Temperature, Humidity, Gas Pressure and Indoor Air Quality (IAQ)
    • Sensor
      • BOSCH BME680 Integrated Environmental Unit
    • Compact size
      • Built-in LoRa Antenna, swap-able battery
      • Easy to mount and maintain
    • Low power operation
      • Standby current of less than 15 uA
      • Adjustable sampling and transmission interval
    • Battery
      • Replaceable 3500 mAh high capacity lithium battery with a battery life of more than 2 years
    • LoRaWAN 1.0.2 fully compliant


    Working Temperature





     Operating Temperature




    Storage Temperature




    Power Consumption

    Parameter Current Unit
    Standby Current <15 uA
    Current in Sensors Working Mode <10 mA
    Current in LoRa Transmission Mode <150 mA

    Temperature Sensor Specifications

    Parameter Min Typical Max
    Temperature Range -40℃ +25℃ +85℃
    Accuracy 0.5℃
    Output Resolution 0.01℃

    Humidity Sensor Specifications

    Parameter Min Typical Max
    Humidity Range 0% r.H 100 % r.H.
    Accuracy +-3% r.H.
    Output Resolution 0.008% r.H.

    Gas Pressure Sensor Specifications

    Parameter Min Typical Max
    Range 300 hPa 300 hPa
    Accuracy +-0.6 hPa
    Output Resolution 0.18 Pa.

    IAQ Sensor Specifications

    Parameter Min Typical Max
    IAQ Range 0 500
    Accuracy 15
    Output Resolution 1

    Power Supply Battery Specifications

    Parameter Max Unit
    Nominal Battery Voltage 3.6 V
    Battery Specification ER18505
    Nominal Capacity 3500 mAh
    Temperature Range -55~85 ºC
    Battery Dimensions 18*50.5 mm

    Note :
    1. The included battery is non-rechargeable. In case you need to plug in the Micro USB port for the purpose of configuring the node you should remove
    the battery. There is no protection circuitry and leaving the battery inside the device when connected via the Micro USB interface will damage it and might result in the device overheating and catching fire. Please make sure you remove the battery immediately after you open the casing, before performing any other configuration or maintenance.

    2. The pin distance of the battery connector is 2.0mm. When choosing a battery, attention should be paid to the consistency of positive and negative poles with the figure above. Reverse connection or short circuit may damage the device and may cause overheating and combustion of the battery. Therefore, when replacing the battery, it is necessary to strictly confirm whether the positive and negative poles of the connector are correct.



    RAK Wireless Resources


    We Also Recommend



    Sold Out