We're Open & Processing Orders as Usual, with Wholesale Prices and Very High Level of Hygiene and Safety in place.

Cart 0

RAK831 LoRaWAN Gateway Adapter Board for Raspberry Pi 3B+

  • $40.00
  • Save $20
  • (Exc. GST)

  • Available in stock

  • Shopify secure badge
  • $ We Ship Worldwide from AU (Perth), and Prices (AUD) are Exc. GST
  • $ We Offer Further Discounts for Higher Quantities & Large Orders (Request for Quote)
  • $ We Accept Purchase Orders & Net30 Payment for Educational Institutes
  • RAK831 LoRaWAN Gateway Adapter Board for Raspberry Pi 3B+

    This is the adaptor board for RAK831 LoRaWAN Gateway and includes the GPS module and antenna.

    RAK831 is a high-performance multi-channel concentrator transmitter/receiver module,which is designed to receive several LoRa data-packets. Meanwhile, use different spreading factors on multiple channels. It can be the front end of the gateway, which enables long range and stable communication between Lora gateway and large amount of LoRa end-nodes. RAK831 indicate 8 channels. In the United States, for example, seven LoRa gateway signals can cover the Downtown Manhattan area, with Star topology gateways and long-distance communications coverage.

    • Sensitivity: down to -138dBm,Output Power up to 20dbm
    • Open 8 channels uplink and 1 channel downlink for Makers
    • SX1301 based processor
    • USB or SPI interface
    SX1301 is an RF front end of a LoRa™ gateway. It is able to receive on different frequency channels at the same time and is able to demodulate the LoRa™ signal without knowledge of the used spreading factor of the sending node.


      • LoRa Concentrator Engine: Semtech SX1301
      • Sensitivity: -142.5 dBm
      • Output power up to 350mW or 25.5dBm
      • Range up to 15 km (Line of Sight)
      • Designed for 915MHz US/Australia LoRA ISM band
      • 2x SX1257 as Tx/Rx front-ends
      • Support 10 channels: 8 downlink, 1 uplink, 1 FSK
      • Temperature: -40 to 85 C
      • Sleek and compact anodized enclosure: 70 x 92 x 54mm
      • SMA connector for GPS/GNSS antenna
      • RP-SMA connector for 915MHz antenna


      RAK Wireless Resources

      RAK831 Datasheet V1.3.pdf
      Raspberry Pi Switchboard Schematic_20171218.pdf
      How to tuning RAK831 to Tx Power as 29dbm.pdf

          We Also Recommend



          Sold Out