Industrial IOT Solutions, Customisation and Integration to Suit Your Requirements

Menu
Cart 0

Stepper Motor Controller Phidget - STC1000_0

  • $89.00
  • Save $50
  • (Exc. GST)


  • Available in stock

  • Shopify secure badge
  • $ We Ship Worldwide from AU (Perth), and Prices (AUD) are Exc. GST
  • $ We Offer Further Discounts for Higher Quantities & Large Orders (Request for Quote)
  • $ We Accept Purchase Orders & Net30 Payment for Educational Institutes
  • Stepper Motor Controller Phidget - STC1000_0

    Get moving with this powerful Bipolar Stepper Phidget. With a maximum power supply of 30V, it can provide up to 4A of current to each stepper coil. The result is that you can control the position, velocity and acceleration of one large bipolar stepper using a port on your VINT Hub (See the "Compatible Products" tab for a list of hubs). Steppers are especially popular in applications where accurate positioning is important.

    Safety and Protection

    The Stepper Phidget comes with a number of safety features since motors have a reputation of damaging unprotected circuits with current spikes when a motor stalls or changes direction under heavy load. There's a fuse socket with a 5A automotive fuse to protect your Phidget on just such an occasion, and the power terminals are polarity protected in case the power supply gets wired up backwards. The VINT port on this Phidget is isolated from the power circuit, so you don't have to worry about damaging your hub or computer if something goes wrong. Ensure that this Phidget is in a well-ventilated area if you plan on running it close to maximum specifications.

    Power Saving Options

    For power-conscious users, we also allow for separate control over the current limit and the holding current limit. If you know your motor will be stationary for long periods of time, but still needs a small amount of holding torque to maintain its position, you can set the holding current appropriately without interfering with the running current limit.

    Product Specifications

    Board Properties
    Controlled By VINT
    Controller Properties
    Motor Type Bipolar Stepper
    Number of Motor Ports 1
    Motor Position Resolution 116 Step (40-Bit Signed)
    Position Max ± 1E+15 1/16 steps
    Stepper Velocity Resolution 1 1/16 steps/sec
    Stepper Velocity Max 115000 1/16 steps/sec
    Stepper Acceleration Resolution 1 1/16 steps/sec²
    Stepper Acceleration Min 2 1/16 steps/sec²
    Stepper Acceleration Max 1E+07 1/16 steps/sec²
    Sampling Interval Min 100 ms/sample
    Sampling Interval Max 60 s/sample
    Electrical Properties
    Available Current per Coil Max 4 A
    Supply Voltage Min 10 V DC
    Supply Voltage Max 30 V DC
    Current Consumption Min 50 mA
    Current Consumption Max 7 A
    Current Consumption Min (VINT Port) 500 μA
    Current Consumption Max (VINT Port) 1 mA
    Quiescent Power Consumption Max * 200 mW
    Physical Properties
    Recommended Wire Size 16 - 26 AWG
    Operating Temperature Min -20 °C
    Operating Temperature Max 85 °C

    * Power consumption varies based on supply power. See the technical section of the User Guide for details.

    Warning

    warning Make sure the power supply is unplugged before attaching or removing wires from the terminal blocks. Failure to do so could cause permanent damage to the Phidget.






    We Also Recommend

    Sale

    Unavailable

    Sold Out