IQWS Industrial Wind Speed and Direction Sensor Modbus RS485
IQWS Industrial Wind Speed and Direction Sensor Modbus RS485
IQWS wind speed and wind direction sensor is used to measure the wind speed and wind direction value, and convert it into an electrical signal, which can be directly transmitted to the recording device for processing. The sensor housing is made of aluminium alloy, using a special mould precision die-casting process, the dimensional tolerance is very small, the surface precision is very high, and it has high weather resistance, high strength, corrosion resistance and water resistance, and the whole sensor has Good adaptability to harsh environments.
The cable connector is a military plug, which has good anti-corrosion performance, which can ensure the long-term use of the instrument. At the same time, it cooperates with the internal imported bearing system to ensure the accuracy of wind speed and wind direction collection.
The circuit module PCB is made of military-grade A-grade materials, ensuring the stability of parameters and the quality of electrical performance; the electronic components are all imported industrial-grade chips, so that the whole has a very reliable anti-electromagnetic interference ability.
Product features:
- Aluminium alloy material
- Non-contact magnetic sensing measurement
- High weather resistance, high strength
- Excellent corrosion and water resistance
- Excellent strong anti-radio frequency, anti-electromagnetic interference
Technical Parameters:
Operating Voltage | 12-30VDC |
Output signal | RS485/4-20mA/0-5VDC/0-10VDC |
Range |
Wind speed: 0-30m/s,0-60m/s Wind direction: 16 directions or 8 directions (0-360 degrees) |
Precision | Wind speed: ±3% (≥5m/s); wind direction: ±3 degrees |
Maximum power consumption | Current type MAX≤500mW; RS485 type MAX≤300mW |
Start wind speed | ≤0.5m/S |
Surge protection | EMC Class III |
Static protection | 15KV |
Operating temperature | -40-85℃ |
Working humidity | 0%~95%(non-condensing) |
Protection level | IP65 |
Sensor installation instructions
1. Please install the sensor horizontally. The electrical connector should be aligned with the north during installation. The angle between the base and the horizontal plane should not exceed 5℃ to ensure that the sensor can accurately measure the wind speed and direction at low wind speeds.
2. The position and shape of the wind cup and windmill arm, wind direction rod and tail fin directly affect the accuracy of the sensor. Please do not hold firmly the wind cup, windmill arm, wind direction rod and tail fin during installation, so as not to damage the sensor structure and affect the measurement accuracy.
Documents: