SHT20 I2C Temperature & Humidity Sensor (Waterproof Probe)

SHT20 I2C Temperature & Humidity Sensor (Waterproof Probe)

This SHT20 I2C temperature & humidity sensor is equipped with a waterproof probe. It comes with the 4C CMOSens® SHT20 temperature & humidity sensor chip and the probe has gone through dual waterproof protection test.
The SHT20 I2C temperature & humidity sensor adopt Sensirion techniques. Except for the humidity sensor of capacitive type and the temperature sensor of the band gap, SHT20 contains an amplifier, A/D converter, OTP memory and a digital processing unit. Compared with early SHT1x series and SHT7x series, SHT20 shows strong reliability and long-term stability. It can measure the surrounding environment temperature and relative air humidity precisely.
The SHT20 waterproof temperature & humidity sensor adopts dual waterproof protection techniques. The inner PCB has perfusion and encapsulation protection, and the probe enclosure is made of PE waterproof materials. This is a special waterproof breathable material that allows water molecules to seep in while blocking water droplets from seeping in at the meantime. The sensor won't be damaged even after a long time submerges in the water. There is also a built-in 10k Pull-up resistor and 0.1uf filter capacitor. It enables the sensor to be directly used with the microcontroller such as Arduino.

 
Sensor Interface:

Red--VCC

Green--GND

Black or Blue--SDA

White or Yellow--SCL