Industrial Internet of Things, AI, Sensing, Telecommunication & Customised System Monitoring. Hot Deals ON!

Cart 0

SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT for Raspberry Pi, global band support

  • $69.00
  • Save $20
  • (Exc. GST)

  • Available in stock

  • $ We Ship from our stock in AU (Perth) with pickup option, and Prices are Exc. GST
  • $ We Offer Quantity Discounts for Large Orders 10+ qty (Request for Quote)
  • $ We Accept Purchase Orders & Net 30 Payment for Eligible Accounts

    SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT for Raspberry Pi, global band support

    • Low Power Narrow Band Cellular IoT Communication Module For Raspberry Pi
    • Based on SIM7070G, Global Band Support

    This is a telecommunication HAT for Raspberry Pi which supports global bands of NB-IoT, Cat-M, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.

    Compared to SIM7080G, this module also supports GPRS (2G); compared to SIM7000C/E, it is more generic due to the global bands support.

    Features At A Glance
    • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
    • Supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
    • Supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo)
    • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
    • Breakout UART control pins, to connect with host boards like Arduino/STM32
    • SIM card slot, supports ONLY 1.8V SIM card (3V SIM card is not available)
    • 2x LED indicators, easy to monitor the working status
    • Baudrate: 300~3686400 bps
    • Common baudrate auto-negotiation: 9600/19200/38400/57600/115200 bps
    • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
    Band NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85
    Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85
    GSM/GPRS/EDGE: 850/900/1800/1900MHz
    Data rate NB-IoT: 136Kbps(DL)/150Kbps(UL)
    Cat-M: 589Kbps(DL)/1119Kbps(UL)
    GPRS: 85.6Kbps(DL)/85.6Kbps(UL)
    EDGE: 236.8Kbps(DL)/236.8Kbps(UL)
    SIM card support NB-IoT/Cat-M/2G card (1.8V SIM card ONLY)
    Applicable region global
    Receiver type 16-channel
    C/A Code
    Band GPS L1: 1575.42 ± 1.023MHz
    GLONASS L1: 1598.0625 ~ 1605.375MHz
    BDS B1: 1559.052 ~ 1591.788MHz
    Galileo L1: 1575.42 ± 1.023MHz
    Data format NMEA-0183
    Antenna Active antenna
    Power supply 5V
    Operating voltage 5V / 3.3V (configured via 0Ω resistor)
    Current consumption about 41mA (idle mode)
    Operating temperature -40°C ~ 85°C
    Storage temperature -45°C ~ 90°C
    Dimensions 30.50mm × 65.00mm
    Standard Raspberry Pi 40PIN GPIO

    Compatible With Raspberry Pi Series Boards

    Global Band Support Of NB-IoT/Cat-M/2G

    NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85
    Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85
    GSM/GPRS/EDGE: 850/900/1800/1900MHz

    Cloud Communication

    Supports Communication Protocols Including TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT

    GNSS Positioning

    Supports GPS, BeiDou, GLONASS, Galileo Positioning

    What's On Board

    1. SIM7070G
    2. MP1482 power chip
    3. RT9193-33 power chip
    4. Raspberry Pi GPIO header
      for connecting with Raspberry Pi
    5. USB interface
      for testing AT Commands, getting GPS positioning data, etc.
    6. SIM7070G control interface
      for connecting with host boards like Arduino/STM32
    7. SIM card slot
      supports 1.8V SIM card ONLY
    8. GNSS antenna connector
    9. LTE antenna connector
    1. Module power key
    2. Network status indicator
    3. Power indicator
    4. Operating voltage selection
      A: set IO level as 5V
      B: set IO level as 3.3V (default)
    5. DTR selection
      A: DTR is connected to P26
      B: DTR is disconnected (default)
    6. PWR selection
      A: PWR is connected to P4 (default)
      B: PWR is connected to power supply

    Pinout Definition

    Outline Dimensions

    Resources & Services

    Link to the Product WiKi

    We Also Recommend



    Sold Out